Skip to main navigation.

Electric Safety

At Graham County Electric Cooperative, member safety is important to us. Below are some links to important safety information to help keep you and your family safe

 


Power Line Safety

 

 

Accidentally contacting a power line can be dangerous and in some cases, even deadly. Graham County Electric Cooperative wants to help our members stay safe around power lines.

Keep a safe distance

Whether you are playing outdoors with your children or working on landscaping projects, keep a safe distance from power lines and other equipment your co-op uses to get electricity to your home.

Always remember to:

  • Stay away from power lines, meters, transformers and electrical boxes.
  • Don’t climb trees near power lines.
  • Never fly kits, remote control airplanes or balloons near power lines.
  • If you get something stuck in a power line, call Graham County Electric Co-op to get it.
  • Keep a safe distance from overhead power lines when working with ladders or installing objects such as antennas.
  • Never touch or go near a downed power line.
  • Don’t touch anything that may be touching a downed wire, such as a car.
  • Keep children and pets away.

Return to top


Power Line Hazards and Cars

 

If a power line falls on a car, you should stay inside the vehicle. This is the safest place to stay. Warn people not to touch the car or the line. Call or ask someone to call Graham County Electric Cooperative and emergency services.

The only circumstance in which you should consider leaving a car that is in contact with a downed power line is if the vehicle catches on fire. Open the door. Do not step out of the car. You may receive a shock. Instead, jump free of the car so that your body clears the vehicle before touching the ground. Once you clear the car, shuffle at least 50 feet away, with both feet on the ground.

As in all power line related emergencies, call for help immediately by dialing 911 or call Graham County Electric Cooperative's Office or after hours dispatch at (928) 485-2451.

Do not try to help someone else from the car while you are standing on the ground.

Return to top


Electrical Safety and Generators

Preventing Electrocutions Associated with Portable Generators Plugged Into Household Circuits

When power lines are down, residents can restore energy to their homes or other structures by using another power source such as a portable generator.

Generators installed to supply part or all of the consumer’s load during a power outage shall meet with a Representative from Graham County Electric Cooperative for approval and  shall meet the following requirements.  The consumer’s generator shall be connected to the load through a double throw switch or automatic relays and switches shall disconnect the load from the Cooperative’s system before the generator is connected to the load.  When the Cooperative’s system is re-energized, the generator will be disconnected from the load before the load is reconnected to the Cooperative’s system.

If it is necessary to use a portable generator, manufacturer recommendations and specifications must be strictly followed. If there are any questions regarding the operation or installation of the portable generator, a qualified electrician should be immediately contacted to assist in installation and start-up activities. The generator should always be positioned outside the structure.  Reminder no Generator will be put on GCEC system without approval.  Call us at (928) 485-2451

 

Effects of Backfeed

Backfeed creates a potential risk for Electrocutions to our electrical line workers. Electrocutions are the fifth leading cause of all reported occupational deaths. Following the safety guidelines below can reduce this risk.

Other Generator Hazards

Generator use is also a major cause of carbon monoxide (CO) poisoning. Generators should only be used in well ventilated areas. If water has been present anywhere near electrical circuits and electrical equipment, turn off the power at the main breaker or fuse on the service panel. Do not turn the power back on until electrical equipment has been inspected by a qualified electrician.

Return to top

Powered by Touchstone Energy Cooperatives Logo